Analog Input >> General Properties >> Input Configuration >> Input Source

NI-DAQmx C Reference Help

Edition Date: January 2019

Part Number: 370471AM-01

»View Product Info
Download Help (Windows Only)
Data Type: char*
Description: Specifies the source of the channel. You can use the signal from the I/O connector or one of several calibration signals. Certain devices have a single calibration signal bus. For these devices, you must specify the same calibration signal for all channels you connect to a calibration signal.


You can get/set/reset this property using:

  DAQmxGetAIInputSrc

  DAQmxSetAIInputSrc

  DAQmxResetAIInputSrc

WAS THIS ARTICLE HELPFUL?

Not Helpful