Analog Input >> Rosette Strain Gage >> Rosette Measurement Type

NI-DAQmx C Reference Help

Edition Date: January 2019

Part Number: 370471AM-01

»View Product Info
Download Help (Windows Only)
Data Type: int32
Description: Specifies the type of rosette measurement.


Valid values

DAQmx_Val_PrincipalStrain1 15971 The maximum tensile strain coplanar to the surface of the material under stress.
DAQmx_Val_PrincipalStrain2 15972 The minimum tensile strain coplanar to the surface of the material under stress.
DAQmx_Val_PrincipalStrainAngle 15973 The angle at which the principal strains of the rosette occur.
DAQmx_Val_CartesianStrainX 15974 The tensile strain coplanar to the surface of the material under stress in the X coordinate direction.
DAQmx_Val_CartesianStrainY 15975 The tensile strain coplanar to the surface of the material under stress in the Y coordinate direction.
DAQmx_Val_CartesianShearStrainXY 15976 The tensile strain coplanar to the surface of the material under stress in the XY coordinate direction.
DAQmx_Val_MaxShearStrain 15977 The maximum strain coplanar to the cross section of the material under stress.
DAQmx_Val_MaxShearStrainAngle 15978 The angle at which the maximum shear strain of the rosette occurs.



You can get/set/reset this property using:

  DAQmxGetAIRosetteStrainGageRosetteMeasType

  DAQmxSetAIRosetteStrainGageRosetteMeasType

  DAQmxResetAIRosetteStrainGageRosetteMeasType

WAS THIS ARTICLE HELPFUL?

Not Helpful