PhysicalChannel Members

NI-DAQmx 17.1 .NET Class Library Help

Edition Date: June 2017

Part Number: 370473J-01

»View Product Info
Download Help (Windows Only)

PhysicalChannel Class Methods Properties See Also


The PhysicalChannel type exposes the following members.

Methods

NameDescription
ClearTedsRemoves TEDS information from the physical channel you specify.
ConfigureTeds

Overloaded. Associates TEDS information with the physical channel you specify, using a TEDS sensor connected to the physical channel.

CreateObjRefCreates an object that contains all the relevant information required to generate a proxy used to communicate with a remote object. (Inherited from MarshalByRefObject.)
Dispose

Overloaded. Releases all resources used by PhysicalChannel.

EqualsDetermines whether the specified Object is equal to the current Object. (Inherited from Object.)
FinalizeAllows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object.)
GetHashCodeServes as a hash function for a particular type. (Inherited from Object.)
GetLifetimeServiceRetrieves the current lifetime service object that controls the lifetime policy for this instance. (Inherited from MarshalByRefObject.)
GetTypeGets the Type of the current instance. (Inherited from Object.)
InitializeLifetimeServiceObtains a lifetime service object to control the lifetime policy for this instance. (Inherited from MarshalByRefObject.)
MemberwiseClone

Overloaded. Creates a shallow copy of the current Object.

ToStringReturns a string representation of the object. (Overrides Object.ToString()()().)
WriteTedsData

Overloaded. Write TEDS data from a Byte array to a sensor on the physical channel you specify.

Properties

NameDescription
AIInputSourcesIndicates the list of input sources supported by the channel. Channels may support using the signal from the I/O connector or one of several calibration signals.
AISupportedMeasurementTypes Gets the measurement types supported by the physical channels of the device.
AITerminalConfigurationsIndicates the list of input terminal configurations supported by the channel.
AOManualControlAmplitudeIndicates the current value of the front panel amplitude control for the physical channel in volts.
AOManualControlEnableSpecifies if you can control the physical channel externally via a manual control located on the device. You cannot simultaneously control a channel manually and with NI-DAQmx.
AOManualControlFrequencyIndicates the current value of the front panel frequency control for the physical channel in hertz.
AOManualControlShortDetectedIndicates whether the physical channel is currently disabled due to a short detected on the channel.
AOPowerAmplifierChannelEnableSpecifies whether to enable or disable a channel for amplification. This property can also be used to check if a channel is enabled.
AOPowerAmplifierGainIndicates the calibrated gain of the channel.
AOPowerAmplifierOffsetIndicates the calibrated offset of the channel in volts.
AOPowerAmplifierOvercurrentIndicates if the channel detected an overcurrent condition.
AOPowerAmplifierScalingCoefficientsIndicates the coefficients of a polynomial equation used to scale from pre-amplified values.
AOSupportedOutputTypesGets the generation types supported by the physical channels of the device.
AOTerminalConfigurationsIndicates the list of output terminal configurations supported by the channel.
CISupportedMeasurementTypesGets the measurement types supported by the physical channels of the device.
COSupportedOutputTypesGets the generation types supported by the physical channels of the device
DIChangeDetectionSupportedIndicates if the change detection timing type is supported for the digital input physical channel.
DIPortWidthIndicates in bits the width of digital input port.
DISampleClockSupportedIndicates if the sample clock timing type is supported for the digital input physical channel.
DISampleModesGets the sample modes supported by the physical channels that support sample clocked digital input.
DOPortWidthIndicates in bits the width of digital output port.
DOSampleClockSupportedIndicates if the sample clock timing type is supported for the digital output physical channel.
DOSampleModesGets the sample modes supported by physical channels that support sample clocked digital output.
PhysicalChannelNameGets the name of the physical channel.
TedsBitStreamIndicates the TEDS binary bitstream without checksums.
TedsManufacturerIDIndicates the manufacturer ID of the sensor.
TedsModelNumberIndicates the model number of the sensor.
TedsSerialNumberIndicates the serial number of the sensor.
TedsTemplateIDsIndicates the IDs of the templates in the bitstream in TedsBitStream.
TedsVersionLetterIndicates the version letter of the sensor.
TedsVersionNumberIndicates the version number of the sensor.

See Also

Reference

PhysicalChannel Class

NationalInstruments.DAQmx Namespace

WAS THIS ARTICLE HELPFUL?

Not Helpful