niFgen Configure Analog Filter VI

NI Signal Generators Help (NI-FGEN 18.1)

Edition Date: April 2018

Part Number: 370524V-01

»View Product Info
Download Help (Windows Only)
Installed With: NI-FGEN

Configures the analog filter for the device. You can apply the analog filter setting in Arbitrary Waveform, Arbitrary Sequence, or Script output mode, or in Frequency List or Standard Function output mode when used with user-defined functions.

niFgen Configure Analog Filter


Instrument Handle identifies your instrument session.

Instrument Handle is obtained from the niFgen Initialize VI, niFgen Initialize With Options VI, or the niFgen Initialize With Channels VI.


Channel Name specifies the channel that this VI uses.


Analog Filter Enable specifies whether to enable the analog filter. Set Analog Filter Enable to TRUE to enable the analog filter.

Default value: True


Filter Correction Frequency specifies the filter correction frequency of the analog filter.

On the NI 5411 and NI 5431, NI-FGEN adjusts signal amplitude to compensate for the filter attenuation at that frequency. To disable amplitude correction, set Filter Correction Frequency to 0. For Standard Waveform Output, Filter Correction Frequency should typically be set to be the same as the frequency of the standard waveform.

Units: hertz (Hz)


error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

Default value: no error


Instrument Handle Out passes a reference to your instrument session to the next VI.


error out contains error information. This output provides standard error out functionality.


Not Helpful