|Download Help (Windows Only)|
Short Name: Channel Delay
Property of niFgen
Specifies the delay to apply to the analog output of the channel specified by the Active Channel property.
You can use the output delay to configure the timing relationship between channels on a multichannel device. Values for this property can be zero or positive. A value of zero indicates that the channels are aligned. A positive value delays the analog output by the specified number of seconds.
|Note You cannot change this property while the device is generating a waveform. If you want to change the device configuration, call the niFgen Abort Generation VI or wait for the generation to complete.|
The following table lists the characteristics of this property.