Standard Function:DC Offset Property

NI Signal Generators Help (NI-FGEN 18.1)

Edition Date: April 2018

Part Number: 370524V-01

»View Product Info
Download Help (Windows Only)

Short Name: DC Offset

Property of niFgen

Controls the DC offset of the standard waveform that the signal generator produces.

This value is the offset at the output terminal. The value is the offset from ground to the center of the waveform you specify with the Waveform property.

For example, to configure a waveform with an amplitude of 10.00 V to range from 0.00 V to +10.00 V, set this property to 5.00 V.

Units: volts (V)

Default Value: None

Remarks

The following table lists the characteristics of this property.

Datatype fD
PermissionsRead/Write
High-level VIs niFgen Configure Frequency List, niFgen Configure Standard Waveform
Channel-based Yes
ResettableNo

WAS THIS ARTICLE HELPFUL?

Not Helpful