Triggers:Start:P2P Endpoint Fullness:Level Property

NI Signal Generators Help (NI-FGEN 18.1)

Edition Date: April 2018

Part Number: 370524V-01

»View Product Info
Download Help (Windows Only)

Short Name: P2P Endpoint Fullness Start Trigger Level

Property of niFgen

Specifies the number of samples the endpoint needs to receive before the signal generator starts generation. This property applies only when the Start Trigger Type property is set to P2P Endpoint Fullness. Refer to the Flow Control topic in the NI Signal Generators Help for more information about peer-to-peer operations. This property is coerced down to 8-byte boundaries.

Note  Due to an additional internal FIFO in the signal generator, the writer peer actually must write 2,304 bytes more than the quantity of data specified by this property to satisfy the trigger level.

Remarks

The following table lists the characteristics of this property.

Datatype iL
PermissionsRead/Write
High-level VIs N/A
Channel-based No
ResettableNo

WAS THIS ARTICLE HELPFUL?

Not Helpful