|NI-SCOPE (English | Japanese)|
Short Name: DDC Enabled
Property of niScope
Enables/disables the digital downconverter (DDC) block of the digitizer. When the DDC block is disabled, all DDC-related properties are disabled and have no effect on the acquired signal. The default value is FALSE.
|Note This property can be used only with high-speed digitizers that support onboard signal processing (OSP). NI-SCOPE returns an error if you use this property with a device that does not support OSP. For NI 5620/5621 digitizers, use Enable DDC.|
The following table lists the characteristics of this property.