niScope Configure Chan Characteristics

NI High-Speed Digitizers Help (NI-SCOPE)

Edition Date: January 2017

Part Number: 370592AB-01

View Product Info

DOWNLOAD (Windows Only)


NI-SCOPE (English | Japanese)

Configures the properties that control the electrical characteristics of the channel. These properties are the input impedance and the bandwidth.

Related topics:

niScope Configure Chan Characteristics

/images/reference/en-XX/help/370592AB-01/cio.gif

instrument handle identifies a particular instrument session.

/images/reference/en-XX/help/370592AB-01/cstr.gif

channels specifies the channel from which to acquire data.

For more information, refer to Channel String Syntax.

/images/reference/en-XX/help/370592AB-01/cu32.gif

input impedance is the input impedance for the channel.

Default Value: 1 mega ohm

Defined Values

1 mega ohm

50 ohms

/images/reference/en-XX/help/370592AB-01/cdbl.gif

maximum input frequency specifies the bandwidth of the channel at which the input circuitry attenuates the signal by 3 dB. Pass 0 for this value to use the hardware default bandwidth. Pass -1 for this value to achieve full bandwidth.

Default Value: 0.00 Hz

/images/reference/en-XX/help/370592AB-01/cerrcodeclst.gif

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

/images/reference/en-XX/help/370592AB-01/iio.gif

instrument handle out has the same value as the instrument handle.

/images/reference/en-XX/help/370592AB-01/ierrcodeclst.gif

error out contains error information. This output provides standard error out functionality.

WAS THIS ARTICLE HELPFUL?

Not Helpful