|NI-DCPower (English | Japanese)|
Short Name: Current Limit Range
Property of niDCPower
Specifies the current limit range, in amps, for the specified channel(s).
The range defines the valid values to which the current limit can be set. Use the Current Limit Autorange property to enable automatic selection of the current limit range.
The Current Limit Range property is applicable only if the Output Function property is set to DC Voltage.
|Note The channel must be enabled for the specified current limit to take effect. Refer to the Output Enabled property for more information about enabling the output channel.|
For valid ranges for your device, refer to Ranges.
The following table lists the characteristics of this property.
|High-level VIs||niDCPower Configure Current Limit Range|