|NI-DCPower (English | Japanese)|
Short Name: Voltage Limit Range
Property of niDCPower
Specifies the voltage limit range, in volts, for the specified channel(s).
The range defines the valid values to which the voltage limit can be set. Use the Voltage Limit Autorange property to enable automatic selection of the voltage limit range.
The Voltage Limit Range property is applicable only if the Output Function property is set to DC Current.
|Note The channel must be enabled for the specified voltage limit range to take effect. Refer to the Output Enabled property for more information about enabling the output channel.|
For valid ranges for your device, refer to Ranges.
The following table lists the characteristics of this property.
|High-level VIs||niDCPower Configure Voltage Limit Range|