![]() |
NI-DCPower (English | Japanese) |
Specifies whether to use local or remote sensing of the output voltage on the specified channel(s).
Refer to the Devices topic specific to your device in the NI DC Power Supplies and SMUs Help for more information about sensing voltage on supported channels.
Related topics:
![]() |
instrument handle identifies a particular instrument session. instrument handle is obtained from the niDCPower Initialize With Channels VI. |
||||||
![]() |
channel name specifies to which output channel(s) to apply this configuration value. Specify multiple channels by using a channel list or a channel range. A channel list is a comma (,) separated sequence of channel names (for example, 0,2 specifies channels 0 and 2). A channel range is a lower bound channel followed by a hyphen (-) or colon (:) followed by an upper bound channel (for example, 0-2 specifies channels 0, 1, and 2). In the Running state, multiple output channel configurations are performed sequentially based on the order specified in this parameter. |
||||||
![]() |
sense specifies local or remote sensing on the specified channel(s). The default value is Local (1008) if the device supports local sense. Otherwise, the default and only supported value is Remote (1009).
|
||||||
![]() |
error in (no error) describes error conditions that occur before this node runs. This input provides standard error in functionality.
|
||||||
![]() |
instrument handle out passes the handle used to identify the session in all subsequent NI-DCPower VI calls. |
||||||
![]() |
error out contains error information. This output provides standard error out functionality.
|
Helpful
Not Helpful