|Download Help (Windows Only)|
You can use the LabVIEW Digital Filter Design Toolkit to execute a digital filter on many different types of targets. The following table shows the supported target types and any additional software you must install to execute a digital filter on that type of target.
|Type of Target||Additional Required Software|
|A computer running Windows||—|
|A National Instruments field-programmable gate array (FPGA) target, such as an NI Reconfigurable I/O (NI-RIO) device. To use a digital filter on an FPGA target, you first must generate FPGA code for that filter.||
|A 32-bit microprocessor. To use a digital filter on a 32-bit microprocessor, you first must generate fixed-point C code for that filter.||
|An NI Real-Time (RT) target, such as an NI PXI or CompactRIO controller, running the NI ETS or Wind River VxWorks real-time operating system (RTOS). The Digital Filter Design VIs support native execution on these operating systems.||
|Note Refer to the National Instruments Web site for information about the National Instruments products this table mentions.|