Configure R Series I/O Dialog Box

NI R Series Multifunction RIO Device Drivers Help

Edition Date: May 2018

Part Number: 371508V-01

»View Product Info
Download Help (Windows Only)

Right-click one of the following R Series devices in the Project Explorer window and select Change I/O Configuration from the shortcut menu to display this dialog box.

Use the pull-down menu to select the configure R Series I/O dialog box for a device.

PCIe-7820R

  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

PCIe-7821R

  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

PCIe-7822R

  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

PXIe-7820R

  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

PXIe-7821R

  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

PXIe-7822R

  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

PXIe-7846R

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

PXIe-7847R

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

PXIe-7856R

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

PXIe-7857R

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

PXIe-7858R

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

PXIe-7861

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V.

PXIe-7862

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V.

PXIe-7867R

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V.

PXIe-7868R

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V.

USB-7845R

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

USB-7845R OEM

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

USB-7846R

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

USB-7846R OEM

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

USB-7855R

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

USB-7855R OEM

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

USB-7856R

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

USB-7856R OEM

  • AI Terminal Mode—Specifies the terminal mode for the AI channels as RSE (referenced single-ended), NRSE (non-referenced single-ended ), or DIFF (differential).
  • AI/AO Data Type—Sets the data type for the module. Select Calibrated if you want the FPGA I/O Node to return fixed-point data from the module in units of volts. The fixed-point data is signed, with a word length of 27 bits and an integer word length of 5 bits for the analog input channels and a word length of 20 bits and an integer word length of 5 bits for the analog output channels. Select Raw if you want the FPGA I/O Node to return binary data from the module. If you select Raw, you must convert and calibrate the analog input values in the host VI. The default is Calibrated.
  • Analog Input Channels—Specifies the AI channel(s) for which you want to select the gain.
  • Voltage Range—Specifies the input range for the selected channel(s) as ±10 V, ±5 V, ±2 V, or ±1 V.
  • Connectors—Specifies the digital connector(s) for which you want to select the logic level.
  • Logic Family—Specifies the logic level for the selected connectors(s) as 3.3 V, 2.5 V, 1.8 V, 1.5 V, or 1.2 V.

WAS THIS ARTICLE HELPFUL?

Not Helpful