|Download Help (Windows Only)|
June 2011, 371541F-01
Requires: Embedded Module for ARM Microcontrollers, Mobile Module, or Touch Panel Module. This topic might not match its corresponding palette in LabVIEW depending on your operating system, licensed product(s), and target.
Use the Serial Compatibility VIs to interface with devices using serial communication.
The VIs on this palette can return serial compatibility error codes.
(x86 Pocket PC Emulators) You must configure the serial access before you can use the Serial Compatibility VIs.
|Bytes At Serial Port||Returns the number of bytes in the input buffer of the serial port indicated in port number.|
|Close Serial Driver||Closes the specified port.|
|Serial Port Break||Sends a break on the output port specified by port number for a period of time at least as long as the delay input.|
|Serial Port Init||Initializes the selected serial port to the settings you specify.|
|Serial Port Read||Reads the number of characters specified by requested byte count from the serial port indicated in port number.|
|Serial Port Write||Writes the data in string to write to the serial port indicated in port number.|
© 2005–2011 National Instruments Corporation. All rights reserved.