Requires: FPGA Module
Right-click an FPGA target in the Project Explorer window and select Properties from the shortcut menu to display the FPGA Target Properties dialog box. The General page appears by default.
Use this page to set general characteristics of the FPGA target.
This page contains the following components:
- Name—Specifies the name of the FPGA target that appears in the Project Explorer window.
- Resource—Specifies the FPGA target hardware. For FPGA targets that appear in NI Measurement & Automation Explorer (MAX), this is the resource or device name.
- Target Information—Displays the FPGA target class of the FPGA target you configured in the Project Explorer window as well as other target-specific information. For example, the NI PXI-7831R FPGA target class is PXI-7831R and the FPGA device family is Virtex-II. The functionality and options that you can configure on an FPGA target depend on the FPGA target class and what the FPGA target class supports. You cannot change the Target Class after you add the FPGA target to the Project Explorer window.