Flange 1:Depth Property

FlexRIO Help

Edition Date: November 2015

Part Number: 372614J-01

»View Product Info

»Download the Help in ZIP Format

Short Name: Flange1Depth

Requires: Base Development System

Class: MultiSegmentPipe Properties

To Use: Create a property.

Gets or sets the depth of the flange that appears on the left end of a pipe network when you first place the Multi-Segment Pipe control on the front panel window.

The flange depth is the distance, in pixels, from the end of the adjoining pipe segment to the end of the flange. The maximum flange depth is 50 pixels. The minimum flange depth is four pixels. LabVIEW returns an error if you specify a value greater than the maximum or less than the minimum flange depth.

The following illustration shows the flange depth.

You also can set the flange depth interactively.


The following table lists the characteristics of this property.

Data type
Available in Run-Time EngineYes
Available in Real-Time Operating SystemYes
Settable when the VI is runningYes
Loads the front panel into memoryNo
Need to authenticate before useNo
Loads the block diagram into memoryNo
Remote access allowedYes


Not Helpful