![]() | Download Help (Windows Only) |
Owning Class: filter design
Requires: MathScript RT Module
[num2, den2] = lp_to_lp(num1, den1, w)
[a1, b2, c2, d2] = lp_to_lp(a1, b1, c1, d1, w)
Legacy Name: lp2lp
Transforms an analog lowpass filter to a lowpass filter.
Name | Description |
---|---|
num1, den1 | Specify the transfer function of the filter. |
a1, b1, c1, d1 | Specify the state-space representation of the filter. |
w | Specifies the cutoff frequency. |
Name | Description |
---|---|
num2, den2 | Return the transfer function of the filter. |
a2, b2, c2, d2 | Return the state-space representation of the filter. |
The following table lists the support characteristics of this function.
Supported in the LabVIEW Run-Time Engine | Yes |
Supported on RT targets | Yes |
Suitable for bounded execution times on RT | Not characterized |
num1 = [2, 1, 9, 2, 0.1, 8];
den1 = [1, -9, 7, -3, 1, 0.1];
w = 50E3;
[num2, den2] = lp_to_lp(num1, den1, w)
Helpful
Not Helpful