From 12:00 AM CDT Sunday, October 17 - 11:30 AM CDT Sunday, October 17, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

NI 9226 (Scan Interface)

NI CompactRIO Device Drivers Help

Edition Date: December 2017

Part Number: 373197L-01

»View Product Info
Download Help (Windows Only)

CompactRIO 8-Channel, 24-Bit, 1000 Ω RTD Analog Input Module

Module I/O Variables

To use I/O from this module in a VI, drag and drop I/O variables from the Project Explorer window to the block diagram of the VI. The I/O variables for the channels return calibrated floating-point data in units as specified on the C Series Module Properties dialog box.

Module Channels

The NI 9226 has the following channels.

Channel Description
RTDx RTD input channel x, where x is the number of the channel. The NI 9226 has RTD channels 0 to 7.

C Series Module Properties Dialog Box

Use this dialog box to configure the NI 9226. Right-click the NI 9226 in the Project Explorer window and select Properties to display this dialog box. You can configure the following options.

  • Name—Specifies the name of the C Series module, which appears in the Project Explorer window. LabVIEW assigns a default name to the module based on the slot number. You can use this field to give the module a descriptive name.
  • Module Type—Specifies the type of C Series module. You cannot change this value.
  • Location—Specifies a slot in the chassis for the C Series module.
  • Conversion Time—Specifies the time it takes to acquire one point of data from all channels. You can select 200 ms or 2.5 ms.
  • Channels—Specifies the channel(s) for which you want to configure settings.
  • Measurement Units—Specifies the units you want data to be returned in for the channel. You can select Raw Ohms, Degrees Kelvin, Degrees Celsius, Degrees Fahrenheit, or Degrees Rankine.
  • RTD Type—Specifies the type of RTD connected to the channel by temperature coefficient of resistance (TCR). If you select Custom, you must enter the Callendar-Van Dusen Coefficients below.
    • Callendar-Van Dusen Coefficients—Specifies the coefficients to use in the Callendar-Van Dusen equation, a linearization curve for measuring the temperature of an RTD.

WAS THIS ARTICLE HELPFUL?

Not Helpful