Configuring a Data Group

NI InsightCM™ 3.3 Help

Edition Date: December 2018

Part Number: 374498G-01

»View Product Info
Download Help (Windows Only)

Parent Topic: Data Groups

Create and configure data groups to group data from channels mapped to sensors that monitor the same piece of equipment into one data set.

  1. In the navigation bar at the top of the page, click the arrow next to the Configuration button and select Devices in the pull-down menu to navigate to the Device Configuration page.
  2. Double-click a device to load its Device Configuration page.
  3. In the Equipment Mapping tab, click the Manage Data Groups button and then click Add to display the Select Location dialog box.
  4. Select the top-level asset for the data group. This will likely be an equipment node.
  5. Click Select then OK.
  6. Select a channel in the Channels section and click Select Data Group.
  7. In the Select Data Group dialog box, select the data group you just created in the Data Group listbox.

  8. Click OK to assign the channel to that data group.

Related Information

Operating States

Defining the Asset Tree


Not Helpful