Discovering Cameras

Parent Topic: Getting Started with Thermal Imaging

Before You Begin: Complete the steps in Adding a Thermal Imaging Device.

Complete the following steps to discover the cameras connected to a thermal imaging device:

Note  Allow several minutes after the device you added in the previous topic boots before attempting to discover cameras.

1. In the navigation bar at the top of the page, click the arrow next to the Configuration button and select Devices in the pull-down menu to navigate to the Device Configuration page.
2. From the list of devices on the Devices tab, double-click the device to which the cameras are connected.
3. On the Cameras tab, click Add.
4. In the Add Cameras dialog box, click Discover. The serial numbers of all valid cameras connected to the device appear in the table.
5. Ensure that the cameras you want to add are checked and click Apply.
6. The InsightCM web application prompts you to enter a name for each new camera. Enter a descriptive name for each camera and click OK.

Next Step

Adding and Mapping ROIs in the Asset Tree