Digital Demod:Measurement Filter:Type Property

RFmx Demod 19.1 Help

Edition Date: October 2019

Part Number: 374641M-01

»View Product Info

Download Help (Windows Only)


RFmx Demod 19.1 Help
RFmx Demod 20.0 Help
RFmx Demod 20.6 Help

Short Name: DDemod Meas Filter Type

Property of RFmxDemod

Specifies whether the measurement needs to compute the measurement filter based on the pulse-shaping filter type or uses the custom measurement filter coefficients.

You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.

The default value is Auto.

Auto (0)

The signal analyzer computes the measurement filter coefficients based on the pulse-shaping filter information that you specify in the DDemod Pulse Shaping Filter Type property. If the DDemod Pulse Shaping Filter Type property is set to Custom, the signal analyzer enables equalization.

Custom (1)

The signal analyzer uses the coefficients specified by RFmxDemod DDemod Configure Measurement Filter Custom Coefficients VI.

Remarks

The following table lists the characteristics of this property.

Datatype /images/reference/en-XX/help/374641M-01/ci32.gif
PermissionsRead/Write
High-level VIs RFmxDemod DDemod Configure Measurement Filter
ResettableYes

WAS THIS ARTICLE HELPFUL?

Not Helpful