Digital Demod:Synchronization:Measurement Offset Property

RFmx Demod 19.1 Help

Edition Date: October 2019

Part Number: 374641M-01

»View Product Info

Download Help (Windows Only)


RFmx Demod 19.1 Help
RFmx Demod 20.0 Help
RFmx Demod 20.6 Help

Short Name: DDemod Meas Offset

Property of RFmxDemod

Specifies the offset, which is the location from which the signal is considered for further measurements. The offset is specified in symbols of the reference sequence. This offset is not applicable when the synchronization bits are not found.

You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.

The default value is 0.

Remarks

The following table lists the characteristics of this property.

Datatype /images/reference/en-XX/help/374641M-01/ci32.gif
PermissionsRead/Write
High-level VIs RFmxDemod DDemod Configure Synchronization
ResettableYes

WAS THIS ARTICLE HELPFUL?

Not Helpful