RFmxDemod DDemod Configure Averaging (VI)

RFmx Demod 19.1 Help

Edition Date: October 2019

Part Number: 374641M-01

»View Product Info

Download Help (Windows Only)


RFmx Demod 19.1 Help
RFmx Demod 20.0 Help
RFmx Demod 20.6 Help
RFmx Demod 20.7 Help
Owning Palette: DDemod

Configures averaging for digital demodulation measurements.

RFmxDemod DDemod Configure Averaging

/images/reference/en-XX/help/374641M-01/cio.gif

Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

/images/reference/en-XX/help/374641M-01/ci32.gif

Averaging Enabled enables averaging for digital demodulation measurement.

False (0)

The measurement is performed on a single acquisition.

True (1)

The measurement uses the value of the Averaging Count parameter for the number of acquisitions over which the measurement is averaged. The traces are not averaged.

/images/reference/en-XX/help/374641M-01/ci32.gif

Averaging Count specifies the number of acquisitions used for averaging when you set the Averaging Enabled parameter to True.

/images/reference/en-XX/help/374641M-01/cstr.gif

Selector String comprises of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

Example:

""

"signal::sig1"

You can use the RFmxDemod Build Signal String VI to build the selector string.

/images/reference/en-XX/help/374641M-01/cerrcodeclst.gif

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

/images/reference/en-XX/help/374641M-01/iio.gif

Instrument Handle Out passes a reference to your RFmx session to the next VI.

/images/reference/en-XX/help/374641M-01/ierrcodeclst.gif

error out contains error information. This output provides standard error out functionality.

WAS THIS ARTICLE HELPFUL?

Not Helpful