NationalInstruments.RFmx.GsmMX Namespace

RFmx GSM 19.1 Help

Edition Date: October 2019

Part Number: 375414H-01

»View Product Info

DOWNLOAD (Windows Only)


RFmx GSM 19.1 Help
RFmx GSM 20.0 Help
RFmx GSM 20.6 Help
RFmx GSM 20.7 Help


 

Classes

ClassDescription
RFmxGsmMXDefines a root class which is used to identify and control GSM signal configuration.
RFmxGsmMXConstants Specifies constants for I/O terminals.
RFmxGsmMXModAcc Represents the ModAcc measurement.
RFmxGsmMXModAccConfiguration Provides methods to configure the ModAcc measurement
RFmxGsmMXModAccResults Provides methods to fetch and read the ModAcc measurement results.
RFmxGsmMXOrfs Represents the ORFS measurement.
RFmxGsmMXOrfsConfiguration Provides methods to configure the ORFS measurement
RFmxGsmMXOrfsResults Provides methods to fetch and read the ORFS measurement results.
RFmxGsmMXPvt Represents the PVT measurement.
RFmxGsmMXPvtConfiguration Provides methods to configure the PVT measurement
RFmxGsmMXPvtResults Provides methods to fetch and read the PVT measurement results.
RFmxGsmMXSubObject Represents members that are common to all sub-object of RFmxGsmMX classes.

Enumerations

EnumerationDescription
RFmxGsmMXAutoTscDetectionEnabled Specifies whether the measurement automatically detects the training sequence code (TSC).
RFmxGsmMXBand Specifies the operation band.
RFmxGsmMXBurstSynchronizationType Specifies the method used to synchronize the burst.
RFmxGsmMXBurstType Specifies the burst type. Use "slot(n)" as the selector string to configure or read this method.
RFmxGsmMXDigitalEdgeTriggerEdge Specifies the active edge for the trigger. This method is used only when you set the NationalInstruments.RFmx.GsmMX.RFmxGsmMX.SetTriggerType method to RFmxGsmMXTriggerType.DigitalEdge.
RFmxGsmMXHBFilterWidth Specifies the filter width when you set the NationalInstruments.RFmx.GsmMX.RFmxGsmMX.SetBurstType method to RFmxGsmMXBurstType.HB. Use "slot(n)" as the selector string to configure or read this method.
RFmxGsmMXIQPowerEdgeTriggerLevelType Specifies the reference for the NationalInstruments.RFmx.GsmMX.RFmxGsmMX.SetIQPowerEdgeTriggerLevel method. The IQ Power Edge Level Type method is used only when you set the NationalInstruments.RFmx.GsmMX.RFmxGsmMX.SetTriggerType method to RFmxGsmMXTriggerType.IQPowerEdge.
RFmxGsmMXIQPowerEdgeTriggerSlope Specifies whether the device asserts the trigger when the signal power is rising or when it is falling. The device asserts the trigger when the signal power exceeds the level that you specify in the NationalInstruments.RFmx.GsmMX.RFmxGsmMX.SetIQPowerEdgeTriggerLevel method with the slope you specify. This method is used only when you set the NationalInstruments.RFmx.GsmMX.RFmxGsmMX.SetTriggerType method to RFmxGsmMXTriggerType.IQPowerEdge.
RFmxGsmMXLimitedConfigurationChange Specifies the set of properties that are considered by RFmx in the locked signal configuration state.
RFmxGsmMXLinkDirectionSpecifies the direction for which the frequency is calculated. Only Uplink is supported.
RFmxGsmMXMeasurementTypesSpecifies the type of measurement.
RFmxGsmMXModAccAveragingEnabled Specifies whether to enable averaging for the modulation accuracy (ModAcc) measurement.
RFmxGsmMXModAccDetectedTsc Returns the detected training sequence code (TSC) if you set the NationalInstruments.RFmx.GsmMX.RFmxGsmMX.SetBurstSynchronizationType method to RFmxGsmMXBurstSynchronizationType.Tsc. Use "slot(n)" as the selector string to read this result.
RFmxGsmMXModAccDroopCompensationEnabled Specifies whether to enable droop compensation for the modulation accuracy (ModAcc) measurement. Droop compensation allows the ModAcc measurement to minimize the contribution of amplifier power variations to the EVM results.
RFmxGsmMXModulationType Specifies the modulation scheme used for the signal. Use "slot(n)" as the selector string to configure or read this method.
RFmxGsmMXOrfsAveragingEnabled Specifies whether to enable averaging for the output radio frequency spectrum (ORFS) measurement.
RFmxGsmMXOrfsAveragingType Specifies the averaging type for averaging multiple spectrum acquisitions. The averaged spectrum is used for the output radio frequency spectrum (ORFS) measurement.
RFmxGsmMXOrfsEvaluationSymbolsIncludeTsc Specifies whether to include the training sequence code (TSC) portion of the burst in the output radio frequency spectrum (ORFS) measurement.
RFmxGsmMXOrfsMeasurementType Specifies the type of spectral distortion to be measured.
RFmxGsmMXOrfsNoiseCompensationEnabled Specifies whether to enable compensation of the channel powers for the inherent noise floor of the signal analyzer. Noise compensation is applicable only on modulation offsets and not on switching offsets. Supported Devices: PXIe-5663/5665/5668R, PXIe-5830/5831
RFmxGsmMXOrfsOffsetFrequencyMode Specifies the list of frequency offsets for which you can perform the output radio frequency spectrum (ORFS) measurements.
RFmxGsmMXPropertyIdSpecifies all the attribute identifiers.
RFmxGsmMXPvtAveragingEnabled Specifies whether to enable averaging for the power versus time (PVT) measurement.
RFmxGsmMXPvtAveragingType Specifies the averaging type for multiple acquisitions.
RFmxGsmMXPvtMeasurementStatus Indicates the overall measurement status based on standard-defined limits.
RFmxGsmMXPvtSlotMeasurementStatus Indicates the power versus time (PVT) measurement status for a particular slot. Use "slot(n)" as the selector string to read this method.
RFmxGsmMXSignalStructure Specifies whether the signal is bursted or continuous. For bursted signal and continuous signals, set the NationalInstruments.RFmx.GsmMX.RFmxGsmMX.SetTriggerType to RFmxGsmMXTriggerType.IQPowerEdge and RFmxGsmMXTriggerType.None, respectively.
RFmxGsmMXTriggerMinimumQuietTimeMode Specifies whether the measurement computes the minimum quiet time used for triggering.
RFmxGsmMXTriggerType Specifies the trigger type.
RFmxGsmMXTsc Specifies the training sequence code (TSC) to use. This method is applicable only when you set the NationalInstruments.RFmx.GsmMX.RFmxGsmMX.SetBurstSynchronizationType method to RFmxGsmMXBurstSynchronizationType.Tsc and the NationalInstruments.RFmx.GsmMX.RFmxGsmMX.SetAutoTscDetectionEnabled method to RFmxGsmMXAutoTscDetectionEnabled.False. For access burst RFmxGsmMXTsc.Tsc0, RFmxGsmMXTsc.Tsc1, and RFmxGsmMXTsc.Tsc2 are applicable. Use "slot(n)" as the selector string to configure or read this method.

WAS THIS ARTICLE HELPFUL?

Not Helpful