NI PXI/PXIe-2593 and NI SCXI-1193 3×1 Multiplexers

NI Switches Help

Edition Date: April 2015

Part Number: 375472H-01

»View Product Info
Download Help (Windows Only)

The NI PXI/PXIe-2593 and NI SCXI-1193 modules can be configured as 3×1 Multiplexers. Refer to the following text, table, and figures for configuration instructions, and use the following links for module-specific implementations of this configuration.

Each group of four channels (0:3, 4:7, 8:11, etc.) can be configured as independent, unterminated 3×1 multiplexers. Choose one channel as the "common," and route it to the other three channels.

For example, choosing CH0 as a 3×1 common, route CH1, CH2, and CH3 to it with the command options described in the following table and figure.

Route Connect / Disconnect Calls Connection List Individual Relay Control
CH0-> CH1 CH0->A0B0, A0B0->B0B1, B0B1->A1B1, A1B1->CH1 Close KA0, KA1 Open KB0, KB1
CH0-> CH2 CH0->A0B0, A0B0->B0B1C0, B0B1C0->C0C1, C0C1->B2B3C1, B2B3C1->A2B2, A2B2->CH2 Close KA0, KB0, KA2, KB2
Open KB1*, KB3*, KC0, KC1
CH0-> CH3 CH0->A0B0, A0B0->B0B1C0, B0B1C0->C0C1, C0C1->B2B3C1, B2B3C1->A3B3, A3B3->CH3 Close KA0, KB0, KA3, KB3
Open KB1*, KB2* KC0, KC1
*Switch unused relays away from the signal path to improve high-frequency performance.

Refer to the following figure for an example of a 3×1 configuration using CH0-CH3 on the NI PXI/PXIe-2593 or the NI SCXI-1193.

NI PXI/PXIe-2593 Implementation

The NI PXI/PXIe-2593 can be configured as quad 3×1 multiplexers using its 16 channels. The COM terminals are unused.

NI SCXI-1193 Implementation

The NI SCXI-1193 has 32 channels that can be divided into eight 3×1 multiplexers. Additionally, the four COM terminals can route together, creating a ninth 3×1 multiplexer, as shown in the following figure.

WAS THIS ARTICLE HELPFUL?

Not Helpful