NI PXI/PXIe-2532/2532B 1-Wire Dual 4×64 Matrix Topology

NI Switches Help

Edition Date: April 2015

Part Number: 375472H-01

»View Product Info

Download Help (Windows Only)

The NI TB-2643 terminal block creates a 1-wire dual 4×64 matrix topology with the NI PXI/PXIe-2532 (NI 2532). The NI TB-2643B terminal block creates a 1-wire dual 4×64 matrix topology with the NI PXI/PXIe-2532B (NI 2532B). The following figure represents the NI 2532/2532B in the 1-wire dual 4×64 matrix topology.

Making a Connection

For bank 0, both the scanning command, b0r2->b0c1;, and the immediate operation, niSwitch Connect Channels VI or the niSwitch_Connect function with parameters b0r2 and b0c1, result in the following connection:

signal connected to B0R2 is routed to B0C1

For bank 1, both the scanning command, b1r2->b1c1;, and the immediate operation, niSwitch Connect Channels VI or the niSwitch_Connect function with parameters b1r2 and b1c1, result in the following connection:

signal connected to B1R2 is routed to B1C1

Note  While you can, for example, connect B0R1 to B0C0, you cannot connect B0R1 directly to B1C1 in this topology.

Terminal Block Connections

The NI TB-2643 terminal block connects banks of the NI 2532 to create the 1-wire dual 4×64 matrix topology. The NI TB-2643B terminal block connects banks of the NI 2532B to create the 1-wire dual 4×64 matrix topology. The following figure illustrates how the native banks of the NI 2532/2532B connect using the NI TB-2643/2643B to create the 1-wire dual 4×64 matrix topology.

Bank Connection Diagram

The following tables list the pin assignments for the NI TB-2643/2643B column ribbon cable headers.

Column Pin Connections

The following table refers to the J3 connector on the upper column connection board of the NI TB-2643 and the J13 connector on the NI TB-2643B.

The following table refers to the J2 connector on the upper column connection board of the NI TB-2643 and the J12 connector on the NI TB-2643B.

The following table refers to the J3 connector on the lower column connection board of the NI TB-2643 and the J3 connector on the NI TB-2643B.

The following table refers to the J2 connector on the lower column connection board of the NI TB-2643 and the J2 connector on the NI TB-2643B.

Row Pin Connections

The NI TB-2643 and NI TB-2643B provide two ribbon cable headers for row connection. Use one cable header to connect to your application. Use the other cable header for column expansion.

The following table lists the pin assignments for row connection.

Row Protection Bypass Header

Each row signal is isolated from the reed relays through a 100 Ω resistor. To bypass this resistor, install a jumper on the appropriate pins of the header indicated in the table below. The following table lists the appropriate jumper position for bypassing the resistor on each row signal.

Pinout

The following figure identifies the pins for the NI 2532.

Caution  Do not connect to RESERVED pins. Keep low-voltage pins isolated from row and column channels when high voltage is present.

The following figure identifies the pins for the NI 2532B.

Caution  Do not connect to RESERVED pins.