NI ELVIS II Bode Analyzer

Multisim Help

Edition Date: February 2017
Part Number: 375482B-01
View Product Info

DOWNLOAD (Windows Only)

Multisim 14.0 and 14.0.1 Help
Multisim 14.1 Help
Multisim 14.2 Help

The NI ELVISmx Bode Analyzer measures the gain and phase shift versus frequency for passive or active linear designs.

In NI ELVIS II schematics, this instrument’s icon is located in the NI ELVIS II Platform Control Panel Scope Section of the NI ELVIS II schematic, as shown in the figure below (1).

Complete the following step to connect the instrument:

  1. Place wires from the desired points in your schematic to the pins on the NI ELVIS II Platform Control Panel Scope Section described below:
    • CH 0 + —Positive Stimulus.
    • CH 0 - —Negative Stimulus.
    • CH 1+ —Positive Response.
    • CH 1- —Negative Response.

Complete the following steps to access the front panel:

  1. Double-click the instrument’s icon, shown in the figure above (1). The front panel appears.
  2. Change the settings in the front panel as desired.

Complete the following steps to place this instrument directly onto any Multisim workspace:

  1. Select Simulate»Instruments»NI ELVISmx instruments»NI ELVISmx Bode Analyzer.
  2. Click to place the instrument icon in the desired location on the workspace.
  3. Wire in the same manner as any other Multisim instrument.
  4.   You can also use the NI ELVISmx Instruments toolbar to place this instrument.

For information about using this instrument, click the Help button on its front panel to display the NI ELVISmx Help.

This topic refers to education-specific features of Multisim.


Related Information

NI ELVISmx Instruments Toolbar


Not Helpful