fir_remez (MathScript RT Module Function)

LabVIEW 2012 MathScript RT模块帮助

版本日期:June 2012



Owning Class: filter design

Requires: MathScript RT Module


b = fir_remez(n, f, a)

b = fir_remez(n, f, a, w)

b = fir_remez(n, f, a, filter)

b = fir_remez(n, f, a, w, filter)

[b, ripple] = fir_remez(n, f, a)

[b, ripple] = fir_remez(n, f, a, w)

[b, ripple] = fir_remez(n, f, a, filter)

[b, ripple] = fir_remez(n, f, a, w, filter)

Legacy Name: remez


Uses the Parks-McClellan algorithm to design a linear phase, equiripple, FIR filter. fir_remez is equivalent to the fir_pm function.



Name Description
n Specifies the filter order. n is a positive integer. n must be even for filters with a non-zero gain at the Nyquist frequency. If n does not meet this condition, LabVIEW increases n by 1.
f Specifies the frequencies. f is a real vector of increasing values in the interval [0, 1]. 0 and 1 must be in f. 1 represents the Nyquist frequency.
a Specifies the magnitudes at the f frequencies. a is a real vector of the same size as f.
w Specifies the weights that correspond to f and a. Each band has exactly one weight. The size of w is half the size of f. w is a vector of positive numbers.
filter Specifies the odd-symmetry filter to design. filter is a string that accepts the following values.

'differentiator' Designs a differentiator filter.
'Hilbert' Designs a Hilbert filter.


Name Description
b Returns the filter coefficients of order n. b is a real vector.
ripple Returns the maximum ripple size of the filter. ripple is a positive number.


The following table lists the support characteristics of this function.

Supported in the LabVIEW Run-Time Engine Yes
Supported on RT targets Yes
Suitable for bounded execution times on RT Not characterized


N = 13;
F = [0, 0.1, 0.5, 0.7, 0.8, 1];
A = [0, 1, 1, 1, 0, 0];
W = [1, 10, 1];
B = fir_remez(N, F, A, W)

Related Topics